Spectrum-controls 1756sc-CTR8 Bedienungsanleitung PDF herunterladen (Seite 42)

32 ControlLogix

™

Counter Module

StorageMode = 2 - Store/Wait/Resume

StorageMode = 3 - Store-Reset/Wait/Start

StorageMode = 4 - Store-Reset/Start

InputRange[x] 0,1 INT

This setting determines the threshold were the counter will begin to trigger.

Select the range that is best suited to your sensor’s range.

0= AC 50mVpp threshold

1= AC 200mVpp threshold

2= 5V

3= 12V/24V

KFactor[x] 0 - 1x10

FLOAT (C)

The K scale factor is used for counter scaling. This allows users to scale

the counter output into more useful units, like gallons per minute. When a

non-zero Scale Factor value is set the scale calculation is always

performed. A value of zero must be written to the Scale Factor to disable

this feature. This counter value is divided by the K factor. K factors are

positive numbers.

RFactor[x] 0 - 1x10

FLOAT (C)

In Program Mode the data value in this register is used for scaling. The

M scale factor is used for meter calibration. When a non-zero Scale

Factor value is set the scale calculation is always performed. A value of

zero must be written to the Scale Factor to disable this feature.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 73 74

Keine Kommentare

Spectrum-controls 1756sc-CTR8 Bedienungsanleitung Seite 42